Fat Quarter Size and How Many Make a Yard: A Precut-to-Yardage Chart

QuiltPull

How many fat quarters are in a yard? Four. The harder question comes later: your pattern asks for ½ yard of a main print, and what you actually own is two fat quarters, a fat eighth and a bundle of 2½″ strips. Does that cover it?

This chart puts every common cut on the same ruler: its size, how many you get from a yard, and what it’s worth in yardage. If you keep your stash in a notebook or spreadsheet, adding a “yardage equivalent” column built from this chart lets you check any pattern at a glance.

It’s written by the developer of QuiltPull, an iPhone app for fabric pulls and your fabric stash. You pick each fabric’s cut (yardage, fat quarter, bundle and so on), and the quilt’s board shows ✓ or how much is short (app page · view on the App Store).


The basics: a yard and width of fabric (WOF)

  • A yard is 36 inches, exactly 0.9144 m[6]
  • Width of fabric varies by bolt. Quilting cotton is usually 42″ to 44″ wide[7], and once the selvages are trimmed most guides plan on about 40 usable inches[5]
  • So “½ yard” on a pattern means 18 inches long by the full width of the fabric. To compare it with smaller cuts, compare area

Fat quarter and precut size chart

Cut Size (inches) Size (cm) Yardage equivalent
⅛ yard 4½ × WOF about 11.4 × WOF ⅛ yd
¼ yard 9 × WOF about 22.9 × WOF ¼ yd
Fat quarter (FQ) 18 × 22 (sometimes 18 × 21) about 45.7 × 55.9 ¼ yd
Fat eighth (F8) 9 × 22 or 18 × 11 about 22.9 × 55.9 or 45.7 × 27.9 ⅛ yd
2½″ strip 2½ × WOF about 6.4 × WOF 2½″ of length each
10″ square 10 × 10 25.4 × 25.4 —
5″ square 5 × 5 12.7 × 12.7 —
  • A fat quarter is a half yard cut in half along the width. It has the same area as a regular ¼ yard (9″ × WOF), just twice as long and half as wide[1]
  • Depending on whether the selvage is left on, a fat quarter can measure 18″ × 21″[2]
  • A fat eighth is half a fat quarter, cut either 9″ × 22″ or 18″ × 11″[2][3]. Either way it’s the same area as ⅛ yard
  • Cuts sold as fat quarters aren’t all identical. Measure yours and log the actual size if it differs from 18″ × 22″

How many pieces from one yard

Assuming 42″ of usable width, here’s what one yard yields (our math):

Piece From 1 yard How
Fat quarters 4 half the length × half the width
Fat eighths 8 each FQ cut in half
2½″ × WOF strips 14 36 ÷ 2.5 = 14.4
10″ squares 12 4 across × 3 rows
5″ squares 56 8 across × 7 rows

When a pattern calls for a number of strips or squares, count pieces like this, not area. Area divided by square size overestimates, because the leftover edges don’t make whole pieces.

Converting strip and square bundles to yardage

Strips and squares are often sold as bundles. Strip bundles commonly hold 40 strips, but counts run anywhere from 30 to 42, and 10″ and 5″ square bundles usually hold around 42 pieces[2]. Check the label before you buy or log one.

By area, treating each strip as 42″ long (our math). For strips the result is the same whatever the width: 2½″ × the number of strips ÷ 36.

Bundle Area Yardage equivalent
40 strips, 2½″ × WOF 2.5 × 42 × 40 = 4,200 sq in about 2.8 yd
42 squares, 10″ 100 × 42 = 4,200 sq in about 2.8 yd
42 squares, 5″ 25 × 42 = 1,050 sq in about 0.7 yd

One catch: a bundle usually mixes many prints, often one or two pieces of each. If the pattern wants ½ yard of a single fabric, a bundle’s total yardage doesn’t help. Compare bundles by piece count instead: “cut 12 strips 2½″ × WOF” or “42 squares 5″”.

Checking your stash against a pattern

  1. List the pattern’s fabric requirements by role: main, background, border, binding and backing
  2. List what you own by cut: length for yardage, a count for fat quarters and fat eighths, strips or squares for bundles
  3. For requirements given in yards, convert yardage, FQs and F8s to yards (1 FQ = ¼ yd, 1 F8 = ⅛ yd)
  4. For requirements given as strips or squares, compare piece counts
  5. Write down what’s short. Some guides suggest buying a little extra in case of a mis-cut[4]

Watch the shape, too. Two fat quarters add up to ½ yard of area, but each is only 22″ long. A border or binding strip that needs the full width won’t come out of a fat quarter in one piece, even if the area is there.

Common mix-ups

  • Logging a fat quarter as “¼ yd” and losing track of whether it’s a skinny ¼ yard or a fat one
  • Not writing down how many strips are left in a bundle
  • Skipping the fabric width, then guessing when you work out backing or binding
  • Assuming every fat quarter is exactly 18″ × 22″ without measuring

For the binding and backing math, see how much fabric you need for quilt binding and backing. For the columns worth keeping on every fabric, see what to track in a fabric stash spreadsheet.

In QuiltPull, the cut sets the amount

When you add a fabric in QuiltPull, you pick its cut:

  • Yardage, cut piece, fat quarter, fat eighth, 2½″ strips, 10″ squares, 5″ squares, or a scrap bag
  • Yardage is compared by length, fat quarters and fat eighths by their area turned into length, and strip and square bundles by piece count. Scrap bags show “From scraps” and stay out of the ✓ check
  • Fat quarter and fat eighth sizes, standard width (WOF) and wide back width can be changed in Settings (in the US they start at 18″ × 22″, 9″ × 22″, 44″ and 108″)
  • Switch between yards and inches or meters and centimeters, and tap ⅛, ¼, ½ and more for fractions
  • On each quilt’s board, every slot shows ✓ or how much more you need, and everything short collects in To Buy

Every feature is free. The free version holds 30 fabrics in your stash. Used-up fabrics and samples don’t count, and quilts, boards, To Buy and progress photos are unlimited. QuiltPull Pro is a one-time purchase that removes the 30-fabric limit and the watermark on share cards (app page · view on the App Store).

Summary

  • A yard is 36″ (0.9144 m). Width of fabric varies, so log it
  • A fat quarter is 18″ × 22″, the same area as ¼ yd. A fat eighth matches ⅛ yd
  • One yard at 42″ usable width gives fourteen 2½″ strips, twelve 10″ squares or fifty-six 5″ squares
  • Bundle counts vary. Check the label, and compare bundles by piece count
  • Enough area doesn’t always mean enough length for long pieces

Sources

  1. Wikipedia, “Fat quarter” https://en.wikipedia.org/wiki/Fat_quarter
  2. Liz Johnson, “A Lesson in Pre-Cut Fabric Bundles,” Sew4Home (2018) https://sew4home.com/a-lesson-in-pre-cut-fabric-bundles-names-sizes-shapes-more/
  3. Patchwork Posse, “Fat Eighth Size” https://www.patchworkposse.com/fat-eighth-size/
  4. Elaine Theriault, “THE formula for calculating the necessary yardage for binding your quilt,” QUILTsocial (2018) https://quiltsocial.com/the-formula-for-calculating-the-necessary-yardage-for-binding-your-quilt/
  5. National Quilters Circle, “Figuring Yardage for Quilt Backs” https://nationalquilterscircle.com/video/yardage-quilt-backs-015148
  6. Wikipedia, “Yard” https://en.wikipedia.org/wiki/Yard
  7. Sew Nikki, “Calculating Backing Yardage – Quilt Backing Chart” https://sewnikki.com/calculating-backing-yardage-quilt-backing-chart/

(All checked November 18, 2026. Figures marked “our math” are calculated from the sizes in these sources.)


About the sources for this article This article is based on information from public agencies, official sites and specialist media, reorganized by the editors from a recording and organizing perspective. Figures and statements about specifications or safety were checked against primary sources where possible.


This article organizes information from a recording and organizing perspective. For exact cut sizes and bundle counts, check the shop’s or product’s label. If you notice an error or outdated information, please contact us. Last verified: November 2026

Copied title and URL