Short answer: you don’t need an exact count. Record how many isopods you can see under the same conditions each time, and the trend in those numbers tells you whether the colony is growing. When to split is decided by signs of crowding, not by a magic headcount.
This guide covers three ways to count without tearing the bin apart, a simple estimate from the share you can see, a doubling-time formula you can paste into a spreadsheet, how long colonies take to get going, and how to split. It’s written by the developer of ColonyLog, an iPhone app that does these estimates for you, but everything here works on paper or in Google Sheets (view on the App Store).
What this guide covers
- Why you can’t (and shouldn’t) count every isopod
- Three ways to count without digging
- Estimating from the share you can see
- Doubling time, with a spreadsheet formula
- How long before a colony takes off
- When and how to split
Why you can’t count every isopod
Isopods spend most of their time under leaf litter and bark or down in the substrate, so you’re always seeing only part of the colony [1]. The common pillbug is nocturnal and stays in humid spots during the day [2]. Sifting the whole bin to count is hard on the animals and on the setup. One guide notes that checking for gravid females means flipping isopods over, which most keepers avoid doing often [3].
So instead of chasing an exact number, track a count you take the same way every time.
Three ways to count without digging
Keepers on Arachnoboards describe a few practical methods [4]:
| Method | How | Best for |
|---|---|---|
| Count under a hide | Count the isopods gathered under the same piece of bark or wood | Weekly checks |
| Count from a photo | Snap a photo as soon as you open the lid, then count on screen | Busy bins that are hard to count by eye |
| Sift a small patch | Gently spread out a small area and look for mancae | Checking if breeding has started |
Whichever method you use, keep three things the same so the numbers are comparable:
- Time of day, especially for nocturnal species
- Spot: the same bark slab or corner
- Order with misting: always before, or always after
Estimate from the share you can see
You’ll compare bins more easily if you note roughly how much of the colony is visible, not just the raw count.
Estimated population = number seen ÷ share visible
| Seen | Share visible | Estimate |
|---|---|---|
| 40 | Almost all | about 40 |
| 30 | Half | about 60 |
| 25 | 1/4 | about 100 |
| 18 | 1/10 | about 180 |
The share is a guess and will wobble from week to week, so round the result (“about 60”) rather than trusting the last digit. On days you count carefully, record that exact number separately.
Calculate doubling time
With two or more counts, you can turn growth into “how many days to double.” This assumes the colony grows at a steady rate.
Doubling time = days between counts × ln(2) ÷ ln(later count ÷ earlier count)
Example: about 30 isopods 60 days ago, about 75 today.
- ln(2) is about 0.693, and ln(75 ÷ 30) is about 0.916
- 60 × 0.693 ÷ 0.916 ≈ 45 days to double
In Google Sheets or Excel, put the earlier count in B2, the later count in C2 and the days between in D2:
=D2*LN(2)/LN(C2/B2)
If the count went down, the result is negative and doesn’t mean anything. Visible counts bounce around, so wait until you have three or more counts spread over at least a month before you trust the number.
The same math tells you when you’ll reach a target, say 200:
Days to target = doubling time × ln(target ÷ current count) ÷ ln(2)
From 75 today with a 45-day doubling time, that’s 45 × ln(200 ÷ 75) ÷ 0.693 ≈ 64 days.
How long before a colony takes off
Growth is slow at first, so it helps to know the timeline:
| Stage | Typical figure | Source |
|---|---|---|
| Eggs to hatching (common pillbug) | 3–4 weeks | [2] |
| Young staying in the brood pouch after hatching | another 1–2 weeks | [2] |
| Broods per year and eggs per brood (common pillbug) | 1–3 broods, 100–200 eggs | [2] |
| Development in the brood pouch (varies by species and temperature) | 3–5 weeks | [3] |
| Breeding age for commonly kept species | 3–6 months after birth | [3] |
| Rubber Ducky (Cubaris sp.) to a visible second generation | 6 months or more | [3] |
The pillbug figures come from wild Armadillidium vulgare and may not apply to other species in captivity. A slow species showing no growth for months isn’t unusual [1][3].
When to split an isopod colony
The common advice is to split when a colony outgrows its bin [3]. There’s no fixed number. One guide lists these early signs of overcrowding [5]:
- Substrate breaks down faster than usual even with regular cleaning
- Food disappears faster and you’re feeding more often
- Isopods crowd and compete at the food
- More isopods show up on the walls or at the lid
Left alone, overcrowding can lead to breeding stopping despite plenty of adults, or many isopods dying in a short time [5]. The same guide’s advice is to divide before the bin gets that dense [5].
How to split a colony
- Set up the new bin first, with substrate, leaf litter, hides and both a damp and a dry side [6]
- Decide how many to move. One guide suggests at least 20 to 30 individuals for a new colony [5]; another says Armadillidium can start from 5 (10 is better) and Cubaris and similar species from at least 10 [6]. It depends on the species and your goal
- Move a scoop of the old substrate along with them. It carries over some of the established microbes, the same idea as a partial substrate change [7]
- Write down which bin the new colony came from
- Don’t count right away. Isopods often disappear for a few days after a move [1]
Subtract the number you moved from the parent bin’s count. If you forget, the next check will look like a sudden drop. For keeping parent and child colonies linked, see bin labels and spreadsheet columns for isopod colonies. If numbers are falling, see 6 warning signs of an isopod colony crash.
Estimates and doubling time in ColonyLog
During a round in ColonyLog, you enter how many isopods you see and pick how much of the colony is visible (almost all, half, 1/4 or 1/10), and the app shows an estimate such as “About 60.” When you counted carefully, tap “I counted carefully” and save the exact count instead.
Each colony has a population chart (3 months, 1 year, all) and a line such as “Doubles in about 45 days”. The doubling time needs at least three counts within the last 180 days, with the first and last at least 28 days apart. Tap “Set target count” and you’ll see when the colony should reach it at the current pace. Turn on the “Split forecast” reminder and you’ll get a notification when that point is close.
When you split, choose how many to move and where to place them. The count is taken out of the parent colony, and the parent link is kept.
Every feature is free, with up to 5 active colonies (ended colonies and wishlist items don’t count). ColonyLog Pro is a one-time purchase that removes the colony limit and the watermark on share cards (view on the App Store).
Key takeaways
- You don’t need an exact count. Count the same way, at the same time, in the same spot
- Note the share you can see to get a rough estimate
- Doubling time is =D2*LN(2)/LN(C2/B2). Use three or more counts over a month or longer
- Colonies start slowly. Some species take six months or more
- Split based on signs of crowding, not a fixed headcount
Sources
- Rubber Ducky Isopods, “Isopod Colony Crashed? Here’s What To Check Before You Panic” (May 2026) https://rubberduckyisopods.com/pages/isopod-colony-crashed
- UF/IFAS EDIS, “Pillbug, Roly-Poly, Woodlouse Armadillidium vulgare” (2015, revised 2025) https://edis.ifas.ufl.edu/publication/IN1099
- Furry Critter Network, “Isopod Reproduction” (February 2026) https://www.furrycritter.com/pages/articles/invertebrates/isopod_reproduction.htm
- Arachnoboards, “Safest way to count isopods?” (September 2022) https://arachnoboards.com/threads/safest-way-to-count-isopods.357404
- Furry Critter Network, “Isopods Overcrowding” https://www.furrycritter.com/pages/health/invertebrates/iso_overcrowding.htm
- Exuvium Isopods, “Basic Care Guide for Keeping & Breeding Isopods” (updated October 2026) https://exuvium.net/basic-care-guide-for-keeping-breeding-isopods-food-housing-temperature-humidity/
- Furry Critter Network, “Substrate Replacement” (February 2026) https://www.furrycritter.com/pages/articles/invertebrates/substrate_replacement.htm
(All checked November 8, 2026)
About the sources for this article This article is based on information from public agencies, official sites and specialist media, reorganized by the editors from a recording and organizing perspective. Figures and statements about specifications or safety were checked against primary sources where possible.
This article organizes information from a recording and organizing perspective. For decisions about animal care, please consult a specialist or the seller. If you notice an error or outdated information, please contact us. Last verified: November 2026

